Description
Moroso Oil Preheater
Moroso Dry Sump Tanks separate air quickly from oil, prevent foaming and insure a continuous supply of oil to the pump under all racing conditions! As the oil enters the tank, it rotates around the tank wall and deaerates by spreading over a large surface area, allowing trapped air bubbles to dissipate quickly. This then lets the restored oil flow easily to the bottom outlet of the tank where it can return to the pump and engine.
Tanks are supplied with or without integral filtered breather tanks and all have carefully engineered inlet locations with -AN fittings, large diameter billet aluminum screw-on filler caps and drain plugs.
Heater element designed specifically for heating oil; does not scorch or boil the oil like "converted water heater" designs 212 watts of power raises temperature of 12 quarts of oil 60?F in about 30 minutes. Element screws into place; 120 volt rating; includes detachable 7-foot cord. Length of heating element is 4-1/2" from fitting to tip.
Moroso Oil Preheater