Boxes & Rev Limiters

Vibration Mounts - MSD 6 Series - MSD 8823

This Shielded Magnetic pick-up Cable will help protect the trigger signal from the distribu-tor or crank trigger pick-up from Electro Magnetic Interference (EMI). The pick-up wires are wound together and routed through a special aluminum skinned sleeve...

MSD RPM MODULE - INDIVIDUAL

MSD Tach Splitter If you are running a dual ignition system, this little device will allow the tachometer to operate with both ignitions. Simply install the splitter between the tach outputs and the Tachometer. Female faston connectors match common...

Wiring Harnesses To ease the installation of an MSD Ignition, we offer Wiring Harnesses. The harnesses provide a completely splice-free installation with matching connectors and corresponding wire colors!MSD to GM Dual Connector Coil Wiring Harness

Replacement Cable Assembly The replacement cable is 6' long, 2 wire cable needed to connect an MSD magnetic distributor to MSD ignition box.MSD Replacement Cable Assembly

MSD Vibration Mounts for 7,8, 10 Series IgnitionMSD Vibration Mounts

RPM Module Kits include five modules in 200 rpm increments. Each kit is within a 1,000 rpm range. For example, the PN 8745 is supplied with: 5,000, 5,200, 5,400, 5,600, 5,800 modules. Even Increments 3,000-3,800 PN 8743 4,000-4,800 PN 8744 5,000-5,800 PN...

RPM Module Selectors The RPM Module Selector plugs directly into the rpm module socket on all MSD Soft Touch Rev Controls and accessories that use plug-in modules. The user can then select between twelve different rpm limits by simply turning the knob...