null

NEW INVENTORY COMING IN DAILY! FREE SHIPPING OVER $199.*some exclusions

Bell

BELL Helmet, M-8 Matte Black X-Large, Snell SA2025 Head and Neck Support Ready

(No reviews yet) Write a Review
SKU:
BEL1419A66
Weight:
3.00 LBS
Shipping:
Calculated at Checkout
  • BELL Helmet, M-8 Matte Black X-Large, Snell SA2025 Head and Neck Support Ready
  • BELL Helmet, M-8 Matte Black X-Large, Snell SA2025 Head and Neck Support Ready
  • BELL Helmet, M-8 Matte Black X-Large, Snell SA2025 Head and Neck Support Ready
  • BELL Helmet, M-8 Matte Black X-Large, Snell SA2025 Head and Neck Support Ready
$499.95

Description

Bell M.8 Matte Black X-Large SA2025 Helmet

M8 Sport (SA2025)

 
Sport Series
 

The M8 Pro is the next evolution in Bell’s legendary M series design, incorporating traditional Bell styling, a huge eyeport for enhanced visibility, and unrivaled versatility, the M8 provides outstanding comfort, performance features, and value. The lightweight composite shell, superior ventilation, and extended size range make the M8 a great choice for racers of all types who want a multi-purpose helmet with a wider field of vision (especially for those who wear eyeglasses) that can be used in all forms of motorsports.

  • Lightweight composite shell
  • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
  • Versatile ventilation system direct flow front chin bar ventilation and upper manual lever air intake vents that can be opened and closed
  • Integrated channels in face piece offer multiple options to install drink tube and radio systems
  • M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices
  • Largest size range available in the Bell Racing product line
  • Large eyeport for enhanced vision
  • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
  • Shield and pivot kit: SRV-8, SRV-1

HELMET
CARE AND MAINTENANCE

 

Proper care and maintenance are important in keeping your helmet in race-ready condition. The following exterior and interior care recommendations will help assure your helmet functions properly and is in peak condition.

 

Exterior care

 

All Bell Helmets are finished with a tough, polyurethane coating which resists scratching. When cleaning the exterior of your helmet, only use the highest quality products that are used for automotive finishes. It is up to the consumer to take great care of their helmet to assure no accidental damage is done to the helmet that may compromise the safety factor of the helmet. Do not use any abrasive or solvent based cleaners on the exterior of your helmet.

 

Interior care

 

The interior of the helmet is often susceptible to dirt and excess moisture. When cleaning the interior of your helmet, only use mild soap and water with a rag to hand wash the interior fit pad. When the interior of the helmet has become wet, allow the helmet to dry before putting it away for storage. We recommend properly drying and cleaning your helmet after every use to assure the best comfort level possible.

SIZING

CERTIFICATIONS

  • Snell SA2025

The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement. 

Size Comparison Chart

Standard SizeHat SizeInchesCentimeters
4XS 6 3/8 20 1/16 51
3XS 6 1/2 - 6 5/8 20 1/2 - 20 7/8 52-53
2XS 6 3/4 - 6 7/8 21 1/2 - 21 5/8 54-55
XS 7 22 56
S 7 1/8 22 3/8 57
M 7 1/4 - 7 3/8 22 3/4 - 23 1/4 58-59
L 7 1/2 23 5/8 60
XL 7 5/8 - 7 3/4 24 - 24 3/8 61-62
2XL 7 7/8 - 8 24 3/4 - 25 1/4 63-64
3XL 8 1/8 - 8 1/4 25 5/8 - 26 65-66
4XL 8 3/8 - 8 1/2 26 3/8 - 26 3/4 67-68

 

Proper Helmet Fit

When properly fitted, the helmet should be worn low on the brow, the eyes near the center of the eye opening, touching the top of the head with uniform and firm pressure all around - tight without excessive pressure points. Consult the How To Fit A Helmet page on the Bell Racing website for more information.   

Proper helmet fit is vital to the performance of a helmet during an impact. For the helmet to perform properly during an impact, it must stay securely on the head.

Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet.

A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.

Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to use.

Size Comparison Chart

Standard SizeHat SizeInchesCentimeters
       
S 7 1/8 22 3/8 57
M 7 1/4 - 7 3/8 22 3/4 - 23 1/4 58-59
L 7 1/2 23 5/8 60
XL 7 5/8 - 7 3/4 24 - 24 3/8 61-62
       

PLEASE NOTE: 

NOT ALL SA2025 HELMETS ARE AVAILABLE YET SO WE ARE JUST LISTING COLOR AND SIZES OF HELMETS WE ACTUALLY HAVE,

BUT WE MAY BE ABLE TO GET MORE SIZES, SO PLEASE CHECK WITH US IF YOU ARE LOOKING FOR SOMETHING DIFFERENT OTHER THAN THE CHOICES SHOWN ABOVE.

 

 

View AllClose