Chassis & Handling
-
Afco Hub Assemblys - AFC9850-6500
US Brake
$74.99Cast Iron Brake Hub & Rotor Flat 1979 and Up GM Style 1.00 Inches Thick 10 1/2 Inch Diameter 5 Inch x 5 Inch Bolt Pattern - 5/8 Coarse Studs AFCO 9850-6500 Â Rotor Diameter: 10.50 Rotor...AFC9850-6500$74.99 -
Allstar Steel Control Arm Shims
Allstar
$7.99 - $8.39Allstar Upper Control Arm Shims 10 Pak -ALL60200 or ALL60201 (two thicknesses .0625 or .125 Shims allow easy adjustment of caster/camber during front end alignment. Available in various thicknesses.ALL60200 1$7.99 - $8.39 -
Hex Tubes 7/8" hex with 5/8" threads
Allstar
$13.99 - $23.79Popular for use in circle track steering and suspension systems, hex tubes are easy to install and easy to adjust. Available in 7/8" hex with 5/8" threads, tubes are black anodized for appearance and...ALL56607 0$13.99 - $23.79 -
Allstar 56220 Balljoints
Allstar
$17.49Allstar Bolt-In Upper Balljoint - ALL56220 Fits popular full-size 1971-94 Impala spindles. Also fits 1971-81 Camaro and 1973-88 Chevelle/Monte Carlo. (Alternate - Moog K5208, TRW 10268 or AFCO...ALL56220$17.49 -
Allstar 56218 Balljoints
Allstar
$19.99Allstar Weld-In Lower Balljoint - ALL56218 Fits popular full-size 1977-89 Impala spindles. Also fits 1971-81 Camaro and 1973-88 Chevelle/Malibu. (Alternate...ALL56218$19.99 -
Allstar 56212 Balljoints
Allstar
$18.99Allstar Weld-In Lower Balljoint - ALL56212 Weld-in joint fits Impala spindle. Can be used to raise the roll center on street stock or modified cars. Base O...ALL56212$18.99 -
Allstar 56206 Balljoint
Allstar
$21.99Allstar Weld-In Lower Balljoint - ALL56206 Weld-in joint fits most tubular A-Frames including popular 1971-76 Impala A-Frames. Taper fits most tubular and Impala spindles. Base O.D. is 2.190"...ALL56206$21.99 -
Allstar 56204 Balljoints -
Allstar
$20.99Allstar Upper Bolt-In Balljoint -ALL56204 Fits U-B Machine style upper A-Frames where a bolt-in style ball joint is required. (Alternate - Moog K6024, TRW 10185 or AFCO 20031)Allstar...ALL56204$20.99 -
Trailing Arm Brackets ALL60186
Allstar
$21.49Allstar Trailing Arm Bracket 1-1/2" Slider Box Trailing Arm welds to frame. Bracket is made from 1/8" wall, 1-1/2" x 6" x 2-1/2" rectangular steel tubing with a 1/2" machined slot for adjustment. Can...ALL60186$21.49 -
Panhard Bar Mounts
Allstar
$99.99Allstar Weld-On Panhard Bar Adjustable Mount Weld bracket on rear of 3" axle tube to mount Panhard bar behind housing. Machined 6" slot makes it possible to change roll center by adjusting Panhard...ALL60185$99.99 -
Allstar 60176 9" Ford Steel Panhard Bar Brackets
Allstar
$29.99Allstar Panhard Bar Bracket ALLSTAR PERFORMANCE 60176 Panhard Bar Bracket, Pinion Mount, Bolt-On, 4 position, Steel, Ford 9 in, EachALL60176 0$29.99 -
Upper Link Brackets
Allstar
$25.99Brackets weld to a 9" Ford housing. Brackets have 3/4" dia. holes. Sold as a pair.Allstar 9" FordALL60166$25.99
Optimize Your Race Car: Unmatched Chassis & Handling Performance
Reliable Welding & Speed is your premier partner for mastering the track, offering a superior selection of Chassis & Handling Components. Our meticulously curated range includes everything you need for next-level performance racing suspension systems, powerful race car brake systems, and responsive race car steering parts, all designed for precision control and track dominance. Whether you're competing in NASCAR, Late Model, or Go Kart divisions, our racing chassis parts and race car handling upgrades provide the critical edge you need. Discover durable, precision-engineered solutions tailored for competitive motorsport applications.
Category at a Glance: Key Features & Benefits
| Feature | Description | Primary Benefit |
|---|---|---|
| Precision Engineering | Components meticulously designed for exact fit and optimal function. | Achieve superior control and predictable handling on any track. |
| Race-Ready Durability | Constructed from high-strength materials like steel, built to withstand extreme racing conditions. | Ensure reliability and longevity, reducing maintenance and boosting confidence. |
| Optimized Handling Dynamics | Advanced designs in suspension, steering, and chassis hardware. | Improve lap times through enhanced grip, stability, and responsiveness. |
| Comprehensive Braking Solutions | High-performance brake pads, rotors, calipers, and master cylinders. | Gain superior stopping power and modulate speed with unmatched precision. |
| Reduced Friction Components | Low-friction wheel bearings, rod ends, and ball joints with specialized liners (e.g., Teflon). | Boost efficiency and speed with smoother mechanical operation. |
Detailed Specification Overview
| Specification | Available Range / Types |
|---|---|
| Component Categories | Brakes, Chassis Hardware, Racing Suspension, Steering, Spindles & Clevis, Bearing Kits, Hubs, Wheels & Accessories. |
| Material Composition | High-strength Steel, Specialized Alloys, Teflon-lined components. |
| Suspension Options | Shocks, Springs (e.g., Ultra High Travel Coil Over, Conventional), Coil-overs. |
| Steering Mechanisms | Pitman Arms (OE Design), Steering Boxes, Spindles, Clevis assemblies. |
| Targeted Racing Divisions | NASCAR, Late Models, SK Modifieds, Go Karts, Tour Type Modifieds, Super Late Models, Modified Racing Series, Quarter Midgets, SK Lights, Street Stocks. |
| Hardware Details | Rod Ends (LH/RH Male, with/without Teflon Liner), Swaybar Eyebolts, Ball Joints (Precision Upper, Bolt-In). |
Who Is This For? Top Applications & Users
- Competitive Racers: Drivers seeking to optimize their vehicles for maximum performance and a decisive edge in various racing circuits and divisions.
- Motorsport Enthusiasts: Individuals passionate about customizing and upgrading their race cars for improved handling, speed, and safety.
- NASCAR Teams & Builders: Professionals requiring precision-engineered components for constructing and maintaining NASCAR-spec vehicles.
- Late Model & Modified Series Teams: Racers focused on fine-tuning suspension and chassis for optimal balance and control in regional and national events.
- Go Kart & Quarter Midget Racers: Aspiring drivers looking for agile steering and robust handling parts to start strong and improve performance.
Explore Our Top Products by Type and Brand
- Advanced Brake Bias Adjusters & Proportioning Valves - Fine-tune your braking performance for ultimate control.
- High-Performance Racing Shocks & Springs - Optimize your race car's suspension for superior handling.
- Precision Racing Steering Components & Systems - Achieve agile and accurate steering response on the track.
- Durable Racing Balljoints & Related Parts - Essential components for robust and precise suspension articulation.
- Lightweight Performance Racing Wheels - Enhance grip and reduce unsprung weight for a competitive advantage.
- Heavy-Duty Chassis Rod Ends & Bearings - Secure your chassis with high-strength and low-friction connecting parts.
- Racing Hubs & Related Components - Ensure smooth wheel rotation and reliable performance at high speeds.
Expand Your Search: Closely Related Categories
- Explore All Race Car Components - Discover a complete range of parts for your competition vehicle.
- Essential Pit Equipment & Tools for Racing - Get everything you need for trackside maintenance and setup.
- Critical Racing Safety Equipment - Prioritize driver protection with our comprehensive safety gear.
At Reliable Welding & Speed, we are dedicated to helping you achieve track dominance. Our commitment means offering the highest quality Chassis & Handling Components with unbeatable value. Don't miss our special New/Used Specials & Close-outs for incredible deals. Plus, enjoy the added benefit of free shipping on all orders over $199 (some exclusions apply). Trust Reliable Welding & Speed for all your precision racing needs and elevate your performance today!