Racing Suspension

Allstar Weld-In Lower Balljoint - ALL56212 Weld-in joint fits Impala spindle. Can be used to raise the roll center on street stock or modified cars. Base O.D. is 1.975". (Alternate - Moog K6117, TRW 10264...

Allstar Weld-In Lower Balljoint - ALL56206 Weld-in joint fits most tubular A-Frames including popular 1971-76 Impala A-Frames. Taper fits most tubular and Impala spindles. Base O.D. is 2.190" (Alternate - Moog K6141, TRW 10267 or AFCO 20038)Allstar Lower...

Allstar Upper Bolt-In Balljoint -ALL56204 Fits U-B Machine style upper A-Frames where a bolt-in style ball joint is required. (Alternate - Moog K6024, TRW 10185 or AFCO 20031)Allstar Upper Balljoint -ALL56204

Allstar Trailing Arm Bracket 1-1/2" Slider Box Trailing Arm welds to frame. Bracket is made from 1/8" wall, 1-1/2" x 6" x 2-1/2" rectangular steel tubing with a 1/2" machined slot for adjustment. Can be used with T-Nut for easy adjustment (ALL60194 or...

Allstar Panhard Bar Bracket ALLSTAR PERFORMANCE 60176 Panhard Bar Bracket, Pinion Mount, Bolt-On, 4 position, Steel,  Ford 9 in, Each

Allstar Clamp On Trailing Arm/Shock Bracket Steel brackets clamp on 3" dia. axle tube for attachment of coil-over shocks and trailing arms. Available with (2) 3/4" holes or a 2"slot. Grade 5 hardware and Nyloc nuts included.Allstar Clamp On Trailing Arm...

Allstar Weld On Trailing Arm/Shock Bracket Flame cut, 1/2" thick steel brackets have 3/4"-10 threaded holes to accept trailing arm and either 1/2" dia. hole for coil-over type shock. Weld to 3" dia. axle housing. (all60110 picture shown)Allstar Weld On...

Afco Cross Shaft Bushing - Used with 20072 Aluminum Shaft -AFC20073Afco Cross Shaft Bushing -AFC20073

Afco Coil Spring Spacer For 5" or 5 1/2" springs; I. D. open for stock mount racing shock installation; Just trim to set wedge and ride height in car. -AFC20192

Afco Coil Spring Spacer Adjustable -AFC20191 ACME threads for high strength; Trim sleeve for initial fit; Use collar to adjust ride height and wedge. Allows 2" range of height adjustment when fitting 5" or 5 1/2" springs into stock stub cars. -AFC20191

Afco Coil Spring Bucket Installs in frame so racing springs (5" - 5 1/2" O.D.) and weight jacks can be used. Works with any 1 1/8" SAE jack bolt.Afco Coil Spring Bucket -AFC20190

Use with 2 5/8" I.D. coil-over springs to increase effective spring rate. Afco Coil Over Spring Rubbers - 3/4 or 7/8